Koenic KMF 240 Mode D'emploi page 18

English
Frothing milk
1. Connect the power plug to a suitable
power outlet.
2. Open the lid and attach the frothing
attachment onto the rotating shaft.
3. Fill it with milk. The milk level must be
between the upper (MAX
marking (MIN).
4. Put the lid on firmly by pushing it down
slightly.
5. Align the milk frother to the positioning
stub at the base.
6. Begin frothing:
Frothing with heater ON:
Press the button. The button lights up
red.
Frothing with heater OFF:
Press the button. The button lights up
blue.
7. The product will turns off automatically
when the milk is heated up or if you think
froth is ready, you could also press switch
button to turn off the product, then unplug
the power plug from the power outlet.
8. Remove the milk frother from the base and
open the lid
Note
You can pour or spoon the milk from the milk
frother.
Caution
Never open the lid during frothing. Do not
remove the milk frother from the base during
frothing.
18
KMF240_A5_130322.indb 18
1
) and lower
3
5
7
2
4
6
8
The milk frother
must be correctly
positioned on
the base before
operating.
22/3/13 3:16 PM