Publicité
Les langues disponibles
Les langues disponibles
Introduction
Thank you for purchasing the LINDY USB 3.0 Dual Gigabit Ethernet Adapter, which offers a
10/100/1000Mbps network connection via USB 3.0 connection. The dual RJ45 design provides
a switch function, which allows sharing the networking access with a second computer.
Features
• USB specification 3.0 up to 5Gbps, USB 2.0/1.1 compliant
• Network standards: IEEE 802.3/802.3u/802.3ab (10Base-T/100Base-T/1000Base-T),
IEEE802.3az (Energy Efficient Ethernet)
• Data Transfer Rates: Ethernet 10Mbps, Fast Ethernet 100Mbps and Gigabit Ethernet
1000Mbps (Half/Full Duplex)
• USB Chipset AX88179
• Internal Gigabit switch chip allows network connection of multiple computers
• Allows independant network switching (without USB connection) – powered via Micro-B
USB port
•
Supports IPv4/IPv6 pack Checksum Offload Engine (COE) to reduce CPU load
• Wake On LAN function
• Interfaces: 1x USB 3.0 A male, 2x RJ45 female, 1x USB Micro-B for optional power
• LEDs: yellow for internet connection (blinking when data are transmitted) ; green for
activcation of the Gigabit network
• Compatible with Win 8.1/8/7/Vista, Mac OS 10.x and above, Linux Kernel 3.x/2.6x
Package Contents
•
USB 3.0 Dual Gigabit Ethernet Adapter
•
Driver CD
•
This Manual
Driver Installation
Caution!
DO NOT connect the Ethernet Adapter to your computer before you install the provided
driver.
Windows:
• Insert the attached CD into the disc drive, run the CD menu or browse the file directory to
choose the rigth driver programm according to your PC version. Click setup.exe and
complete the installation process.
• Connect the USB 3.0 Dual Gigabit Ethernet Adapter to the computer after the installation
process is completed. The USB 3.0 Dual Gigabit Ethernet Adapter will then appear in the
device manager:
User Manual
Publicité
