Important Safeguards - Peavey PV 1 VHF Mode D'emploi

Thank you for purchasing a PEAVEY PV
PV1 VHF wireless systems have user-friendly features and are available in handheld,
lavalier, headset and guitar models.
CAUTION!
1) DO NOT attempt to make internal adjustments to the system. Please refer all
servicing to your authorized Peavey Service Center.
2) Turn the unit off if it is exposed to excessive moisture while in operation. Allow
unit to dry thoroughly, then power back up. If unit fails to power up, then refer
unit to your authorized Peavey Service Center.
WARNING! Risk of injury or death if used improperly.
DURING INSTALLATION AND SETUP
To reduce the risk of shock, DO NOT handle AC/DC adapter with wet hands.
To reduce the risks of fire or shock from damaged power cord, always remove
cord from outlet by grasping the adapter tightly while unplugging.
To reduce the risk of fire or shock from damaged power cord, always turn unit
off before moving it.
To reduce the risk of fire or shock, DO NOT expose this equipment to moisture or dust.
To reduce the risk of fire or shock, use only with specified voltage.
To reduce the risk of fire or shock, DO NOT damage the power cord by placing it
near a heat source or stacking heavy items on top of it.
To prevent damage to unit, DO NOT place on surface that is unstable or that can
tip over.
DURING OPERATION
To reduce the risk of fire or shock, DO NOT remove the chassis cover. There are
no user-serviceable parts inside. For all repairs refer unit to your authorized
Peavey Service Center.
To reduce the risk of fire or shock, DO NOT place water or metal items on top of unit.
To reduce the risk of fire or shock, DO NOT allow metal, liquids or flammable
items to fall into unit.
To reduce the risk of fire or shock, DO NOT touch AC outlet during thunderstorms.
PV
Wireless Microphone System
INTRODUCTION

IMPORTANT SAFEGUARDS

1 VHF
®
1 Diversity Wireless Microphone System.
®