Peavey PV 1 VHF Mode D'emploi page 16

SPECIFICATIONS
Frequency Response 40-20,000Hz, +/- 3dB
Dynamic Range 120dB
Total Harmonic Distortion <0.3%
RF Carrier Frequency Range UHF, choice of single frequency from 178.150 to 214.500
Frequency Stability +/- 0.005%, Crystal controlled
Modulation FM (F3E), +/-20KHz max.
Operating Range up to 250 ft. typical (depending on site conditions); up to 500+ feet optimum
line of sight
TRANSMITTERS
Audio Inputs
PV 1 Peavey neodymium dynamic cartridge
®
PV1 3.5mm mono locking jack for connecting to omni or unidirectional lavalier mic or
unidirectional headset mic, with phantom power (PV1); or connecting to instrument cable (PV1)
CONTROLS
PV1 OFF/ON switch
PV1 OFF/ON switch, input level adjust
LED Indicator Unit "ON" (single flash)
Low Battery Alert (Steady)
RF Power Out 50mW (max. allowed by FCC)
Harmonic & Spurious Emissions> -
Battery 9V Alkaline Handheld – 2) AA Body Pack
Battery Life up to 15 hours
Dimensions 4.2" x 2.5" .88"
(10.7 x 6.4 x 2.2 cm) 9.5" x 1.37"
(24.1 x 3.48 cm)
Weight 3 oz (84g) – 7.5 oz (210g)
RECEIVER
Reception Mode – Diversity
Controls – Power ON/OFF, volume control, mute control
Connectors – Balanced XLR and unbalanced adjustable 1⁄4" audio jacks, 2.1mm barrel-type DC
input jack
LED Indicators – Power ON, 4 LED RF & AF level displays, A/B Diversity
Power Requirements – 12V @ 400mA, nominal, AC/DC adapter supplied