Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Page 2
Usage
For use with 1, 2 or 3-Hour-Rated Floor-Ceiling and Roof-Ceiling Designs.
Flat Ceiling / Horizontal Mount Only.
For use with the following ventilation fan models:
Broan A110-B, A80-B, A80HD-B, AE110-B, AE110L-C, AE50-B, AE80-B, AE80B-B, AE80L-C,
AE80BL-C, AE80S-B, AE80SL-C, AE110S-B, AE110SL-C, AE50110DC, AE50110DCL, AE50110DCS,
AE50110DCSL
NuTone AEN110-B, AEN110L-C, AEN50-B, AEN80-B, AEN80B-B, AEN80L-C, AEN80BL-C, AN110-B,
AN80C-B
Remove Blower & Wiring Panel
The following steps are best performed on a work surface before
fan installation. Protect counter tops by placing corrugated sheet
under the fan.
1. Remove blower and all packing material from fan housing.
2. Remove wiring panel from fan housing.
Install Duct Connector
TABS
3. Install duct connector supplied with fan.
a. Push duct connector through opening from inside of
housing.
b. Engage tabs and secure with #8-18 hex head screw from
parts bag.
RDM2 Installation Guide
SEE DETAILS ON
UL CLASSIFICATION
MARKING ON PRODUCT
Publicité
Table des Matières
