Polycom SpectraLink 8020 Mode D'emploi page 10

If you want to Then
Answer a telephone
call during a PTT
transmission
Enable PTT vibrate
Start a telephone
call during a PTT
transmission
Turn off PTT
Subscribe to
additional PTT
channels
10
START
Press the key. PTT transmissions will be
pre-empted by the telephone call.
To enhance the alerting of a PTT call, PTT
Vibrate may be enabled. When PTT Vibrate
is enabled, the handset will vibrate three times
whenever a PTT broadcast is received, whether
the handset is in standby or in a call. If in a call,
the chirp alert will also sound. The vibration
does not replace any PTT tone volume already
set. To set the handset for PTT vibrate only,
enable PTT Vibrate and set the tone volume
to zero.
START
Press the key and dial the number. PTT
transmissions will be pre-empted during the
telephone call.
Change to a different profile (Silent and Vibrate
disable PTT by default).
Cfg
Press the softkey to open the
Push-to-talk
and select
Subscribed Channels
Select
channels you want to add. Subscribed
channels are marked with an asterisk (*).
Config Menu
.
and then select the
English