Bushnell BACK TRACK Mode D'emploi page 7

HOLD
Home Icon
5. After selecting the icon you want, HOLD the MArK button (while you are physically at or near the location you want
to save), until the distance indication changes to "0". Note: it does not matter which direction you face when marking
the location.
1
Marking an
additional location
6. You may now turn the BackTrack's power off by HOLDING down the MODE/POwEr button, or proceed to another
location you want to mark. Be sure to select a different icon before marking this new spot. If you hold down MArK
with a previously used Location icon selected, you will replace that one with your current location.
PUSH
HOLD
2
Car
Icon
HOLD the MArK button down to save the location of
your campsite (with the "Home" icon selected here)
At the new location,
1
-Select another icon
2
-MArK the new location
7