Stopping The Engine - ETQ TG4000 Manuel D'utilisation

ETQ
EASTERN TOOLS & EQUIPMENT INC
DIY / Job Site
Halogen work light
1/3 HP Airless sprayer
Reciprocating Saw
½ HP Electric Drill
7 ¼ " Circular saw
10" Miter saw
6" Table Planer
10" Table saw / Radial arm
saw
1 ½ HP air compressor
Note: wattages listed are only approximates. Check
your electrical device for actual wattage.

STOPPING THE ENGINE

•
Turn the AC circuit breaker to the "OFF"
position (Figure 1).
Figure 1.
•
Unplug all the electrical loads from the
generator panel (Figure 2).
Figure 2.
Tel: (888)908-6200
1000 -
600 1200
960 960
1000 1000
1500 1500
1800 1800
1800 1800
2000 2000
2500 2500
•
Let the engine run at no-load for several
minutes to stabilize the internal
temperatures of engine and generator.
•
Turn the engine switch to the "OFF"
position (Figure 3).
•
Turn the fuel valve to the "OFF" position
(Figure 4).
12
Web Site: easterntools.com
Figure 3.
Figure 4.