Uline H-9286 Mode D'emploi page 6

TO CHANGE TEMPERATURE SETTING:
Press ( ) to Raise
Press ( ) to Lower
Tap or hold up or down button until desired temperature is seen on display. Temperature will be maintained
automatically anywhere between 62°F and 86°F. For display to read actual room temperature, see "TO USE FAN ONLY
MODE FEATURE" section on page 7.
TO ADJUST FAN SPEEDS:
The fan speed can be selected among four settings: Auto, Lo (Low), Med (Medium) and Hi (High), unless unit runs in
Auto or Dry mode or the Sleep feature is activated.
TO USE AUTO FAN FEATURE:
Fan starts at low speed and adjusts to a proper speed according to what room temperature dictates. For example,
if room does not get too warm, it will stay at the slowest speed. If room temperature rises quickly, such as from a door
being opened, it will automatically go to the highest speed. The fan speeds will readjust back to the slowest speed
as the room returns to original set temperature.
PAGE 6 OF 41
OPERATION CONTINUED
Press to Select
Press Fan Button and
Choose Auto
USER WILL SEE:
USER WILL SEE:
USER WILL SEE:
0321 IH-9286