Uline H-9286 Mode D'emploi page 5

TO TURN ON UNIT:
ON/OFF
Power Button
Unit will run in Cool mode with Eco feature and Auto fan speed setting when used for first time. With Eco feature, when
room temperature is below set temperature, fan will continue to run for three minutes after compressor shuts off. Fan
cycles on for two minutes at 10-minute intervals until room temperature is above set temperature, at which time
compressor turns on again. Eco feature can be activated or deactivated by pressing Eco button, but it is invalid in
Fan only mode.
TO USE AUTO MODE FEATURE:
Press Mode Button
and Choose Auto
This mode is a fixed combination of Cool mode and Auto fan speed setting. User cannot select Fan speed manually
in this mode.
TO USE COOL MODE FEATURE:
Press Mode Button
and Choose Cool
Fan remains on with compressor cycling on and off when room temperature is reached.
PAGE 5 OF 41
OPERATION
USER WILL SEE:
USER WILL SEE:
USER WILL SEE:
0321 IH-9286