Uline H-9286 Mode D'emploi page 8

CHECK FILTER FEATURE:
This feature is a reminder to clean the air filter. LED light will illuminate after 250 hours of operation. To reset after
cleaning the filter, press the "Filter" button and the light will turn off.
TIMER DELAY STOP/START FEATURE:
Press Up/Down
Buttons
To delay stop (or start), press the "Timer" button when unit is power-on/power-off, and "Timer Off"/"Timer On" will
illuminate. To adjust timer setting, tap or hold the up arrow ( ) or the down arrow ( ) to change delay timer at
0.5 hour increments, up to 10 hours, then at one-hour increments, up to 24 hours. The setting will be confirmed
automatically in five seconds and control will count down the time (8, 7.5, 7, etc.) remaining, and all other settings
will stay the same as they were before the timer setting is confirmed until stop (or start). Setting combination of "delay
stop delay start" or "delay start delay stop" is workable. Both "Timer Off" and "Timer On" will illuminate then. Timer
setting can be canceled by either pressing and holding Timer button for two seconds or pressing power button at
any time to turn off unit directly.
PAGE 8 OF 41
OPERATION CONTINUED
USER WILL SEE:
USER WILL SEE HOW MUCH TIME IS CHOSEN:
Press Timer
Button
Press Filter
Reset Button
0321 IH-9286