Basic Operations - JVC KD-LX100 Manuel D'instructions

KD-LX100
SOURCE
BBE BAND OFF
1
Turn on the power.
The display illuminates and
the control panel and control
dial come out.
2
Select the source.
Each time you press the
button, the source changes
as follows:
= Tuner (FM or AM) = CD*
= CD changer or external component**
= (back to the beginning)
* If a CD is not in the loading slot, you cannot
select CD as the source to play.
** Without connecting the equipment and setting
"EXT INPUT" correctly (see page 20), you
cannot select it as the source to play.
To operate the tuner (FM or AM),
see pages 8 – 10.
To operate the CD player,
see pages 11 – 13.
To operate the CD changer,
see pages 23 – 25.
To operate the external component,
see page 26.
Note on display illustrations:
Illustrations will differ from what appears if
"CLOCK DISP" is set to "CLOCK OFF."
See page 19.

BASIC OPERATIONS

SEL DISP
1 3
SCM MONO LOCAL INT RPT
7 8 9 11
10
MODE
3
Adjust the volume.
4
Adjust the sound as you want (see
page 14).
To drop the volume in a moment
Press SOURCE for more than 1 second while
listening to any source. "ATT" starts flashing on the
display, and the volume level will drop in a moment.
To resume the previous volume level, press the
button for more than 1 second again.
To turn off the power
Press and hold OFF/0 until "SEE YOU" appears
on the display.
Note:
When you use this unit for the first time, set the built-in
clock correctly, see page 17.
KD-LX100
RND
12
SOURCE
BBE BAND OFF
2
To increase the volume.
To decrease the volume.
Volume level meter
7