JVC KD-LX100 Manuel D'instructions page 21

4
Press SEL (select) to finish the
setting.
When this function is turned on (the CRUISE
indicator lights up on the display), the proper
volume level is automatically selected among the
3 possible levels according to the driving speed,
and the selected level is shown on the display.
When the driving speed increases.
When the driving speed decreases.
To adjust the volume increase rate
If you find Audio Cruise increases (or decreases)
the volume either too much or too little as the
driving speed changes, you can adjust the
increase rate by changing the boost level.
To change it, follow the procedure below.
1 Press and hold SEL (select) for more than 2
seconds so that one of the PSM items appears
on the display.
¢ or 4
2 Press
"CRUISE MODE" appears on the display.
3 Turn the control dial to select either "CRUISE
1" or "CRUISE 2."
¢ (or 4
4 Press
The current boost level also appears on the
display.
5 Turn the control dial to select the desired boost
level (among 01 to 15).
6 Press SEL (select) to finish the setting.
repeatedly until
) to select "BOOST."
If Audio Cruise does not function correctly
You may need to store the idling speed into
memory to make Audio Cruise function correctly.
NOTICE that a number of factors, such as
electric power steering, wipers, power
windows, air conditioner, etc. do generate
noises and, as a result, may cause Audio
Cruise not to function correctly. If this is the
main cause of malfunction, connect the
memory backup lead (yellow lead) directly to
the car battery to prevent these noises from
affecting Audio Cruise.
1 Start the engine and let it warm up.
2 Press and hold SEL (select) for more than 2
seconds so that one of the PSM items appears
on the display.
¢ or 4
3 Press
"CRUISE MODE" appears on the display.
4 Turn the control dial to select either "CRUISE
1" or "CRUISE 2."
¢ (or 4
5 Press
SET."
6 Turn the control dial to select the desired idling
speed.
7 Press SEL (select) to finish the setting.
When the setting is complete, the unit
automatically checks to see if Audio Cruise
functions correctly with this new idling setting. If it
does not function correctly, Audio Cruise is
canceled automatically and the idling setting
becomes invalid.
• If this happens, see the NOTICE above.
repeatedly until
) to select "RPM
21