Breguet CLASSIQUE TOURBILLON EXTRA-PLAT SQUELETTE 5395 Mode D'emploi page 8

Setting the time
Pull the crown out to position X2. Turn the crown upwards
to move the hands forward, or downwards
the hands backwards, and set the watch to the desired
time.
For accurate time-setting, ensure that the last operation
was done in a clockwise direction. Then push the crown
back to position X1.
After this operation, rotate the crown downwards
make sure it turns freely.
This watch is guaranteed water-resistant to 3 bars
(30 m), as long as the crown is in position X1.
English
to move
to