Product Description; Configuration; Principle Of Operation - Burkert LEVEL SWITCH 8110 Mise En Service

Masquer les pouces Voir aussi pour LEVEL SWITCH 8110:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3 Product description

Scope of delivery
Constituent parts
Type plate
Application area
6
3
Product description

3.1 Configuration

The scope of delivery encompasses:
LEVEL SWITCH 8110 point level switch
Test magnet
Documentation
– this operating instructions manual
– if necessary, certificates
The LEVEL SWITCH 8110 consists of the components:
Housing with electronics
Process fitting with tuning fork
Fig. 1: LEVEL SWITCH 8110
The nameplate contains the most important data for identification and
use of the instrument:
Article number
Serial number
Technical data
Article numbers, documentation
3.2

Principle of operation

LEVEL SWITCH 8110 is a point level sensor with tuning fork for point
level detection.
It is designed for industrial use in all areas of process technology and
can be used in liquids.
Typical applications are overfill and dry run protection. With a tuning
fork of only 38 mm length, LEVEL SWITCH 8110 can be also mount-
ed e.g. in pipelines from DN 25. The small tuning fork allows use in
vessels, tanks and pipes. Thanks to its simple and robust measuring
system, LEVEL SWITCH 8110 is virtually unaffected by the chemical
and physical properties of the liquid.
LEVEL SWITCH 8110 • - contactless electronic switch

Publicité

Table des Matières
loading

Table des Matières