Iridium Edge Pro Mode D'emploi page 24

6.7.4 Cable Routing
When routing the Iridium Edge Pro's mating cable be sure to
• Adequately secure and strain-relieve the cable.
• Do not bend the cable excessively around sharp corners and violate the bend radius
specification.
Route or protect the cable to avoid damages against persons walking or tripping.
•
Connect the cable security to the power supply return ground, close to the power source.
•
The ground connection must be connected prior to connecting power to the device.
Properly ground the Iridium Edge Pro. Failure to properly ground the Iridium Edge Pro could
cause unexpected currents, which could cause serious injury or death.
Ensure that the Iridium Edge Pro is connected to the power source through a quick tripping-
•
fuse. The fuse should be located close to the power source.
Iridium Edge Pro User Manual
UM_Iridium Edge Pro_v1.1_072220
Figure 6-3: Mounting the Iridium Edge Pro
Page 24 of 26