Using Your Hob; Switching The Hob On And Off - Culina IND60KC Manuel D'installation Et D'opération

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

2. Follow the steps under 'To start cooking'.
3. If
does not flash in the display and the water is heating, the pan is suitable.
• Cookware made by the following materials is not suitable: pure stainless steel,
aluminum or copper without a magnetic base, glass, wood, porcelain, ceramic,
and earthenware.
Size of hob(mm)
160
180
210
280
Do not use cookware with jagged edges or a curved base.
Make sure that the base of your pan is smooth, sits flat against the glass, and is
the same size as the cooking zone. Always centre your pan on the cooking zone.
Always lift pans off the hob – do not slide, or they may scratch the glass.

Using your Hob

Switching the hob on and off

Switch the hob on and off by using the main swtich.
1. Touch the main switch key
2. Place a suitable pan on the cooking zone that you wish to use.
• Make sure the bottom of the pan and the surface of the glass are clean and
dry.
3. Touching the zone selecting key, an indicator next to the key will flash.
4. Select power level by touching the
• If you don't choose a heat setting within 1 minute, the hob will automati-
cally switch off. You will need to start again from step 1.
The minimum hob(diameter /mm)
120
140
160
220
. All the indicators show "- ".
10
or
control.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Indtc60Cer60tcCer60dtcCer60mz

Table des Matières