Limitations Of Use; User Obligations; Transport And Storage - HellermannTyton SpotClip-Kit Manuel D'utilisation

2.2

Limitations of use

f Observe the following requirements for the operational
environment:
• The SpotClip-Kit can only be used for LED and fluorescent lights.
• The required installation diameter can be easily adjusted using
the variable slots.
• The SpotClip-Kit 150 can be used for ceiling cut-outs with
diameters from 100 mm to 270 mm.
• The SpotClip-Kit 240 can be used for ceiling cut-outs with
diameters from 170 mm to 310 mm.
• The available inner usable height is 140 mm for the
SpotClip-Kit 150 and 230 mm for the SpotClip-Kit 240.
• The product can be combined with the SpotClip-Plate -
Reinforcement plate for downlights in suspended ceilings.
• The diameter of the ceiling cut-out must be 4 mm larger than
required for the spotlight to be able to install the product.

3 User obligations

The user must observe and comply with the respectively
applicable national legal regulations and accident prevention
regulations. The use of the SpotClip-Kit does not exempt the
user from complying with the installation instructions from the
spotlight manufacturer. Please contact a specialist if you have
any questions.

4 Transport and storage

Do not stack heavy objects on the packaged product.
Operating instructions • SpotClip-Kit • 11-2015
User obligations
5