Customer Service And Spare Parts; Safety Instructions; Representation And Layout Of Warning Instructions - HellermannTyton SpotClip-Kit Manuel D'utilisation

Safety instructions

1.2 Fire protection properties/standards
The product is self extinguishing and its fire protection
properties comply with UL94 V2. The product is tested
according to the glow wire test (GWT) at 960 °C as well as
standards EN 60598-1 and EN 60598-2-2. The used insulating
materials and damp-proof foils or vapour barriers comply with
EN 13501-1 A2 s1 d0. Use only insulating materials and
damp-proof foils or vapour barriers of low flammability, which
do not emit smoke in the case of fire and do not drip.
1.3

Customer service and spare parts

If you have any questions or suggestions, please contact
HellermannTyton in your country. The contact information is
listed in the fold-out page of these operating instructions.
2 Safety instructions
The product was manufactured according to the current state
of technology and the recognised safety regulations.
Nonetheless, improper use of the product can result in hazards
to the life and limb of the user or third parties, or in damage to
the product and other material property. These operating
instructions contain information on safety.
f Always follow all of the instructions to prevent personal injury,
material damage or environmental damage.
2.1

Representation and layout of warning instructions

The warning instructions relate to actions and are structured as
follows:
WARNING
Type and source of danger!
Explanations on the type and source of danger.
f Measures to prevent danger.
A warning indicates possible risk of lethal or serious injuries.
4
Operating instructions • SpotClip-Kit • 11-2015