AEG S65340KG2 Notice D'utilisation page 33

1. Open the doors. Unscrew the middle
hinge (m2). Remove the plastic spacer
(m1).
2. Remove the spacer (m6) and move to
the other side of the hinge pivot (m5).
3. Remove the doors.
4. Remove the left-hand cover pin of the
middle hinge (m3,m4) and move to the
other side.
5. Fit the pin of the middle hinge (m5) in-
to the left-hand hole of the lower door.
6. Remove using a tool the cover (b1). Un-
screw the lower hinge pivot (b2) and
the spacer (b3) and place them on the
opposite side.
7. Re-insert the cover (b1) on the oppo-
site side.
8. Remove the plugs (t1) on the upper
side of both doors and move them to
the other side.
9. Re-insert the lower door on the lower
hinge pivot (b2).
10. Insert the middle hinge (m2) into the
left drill of the lower door.
Installation
m1
m2
m6
m5
m4
m3
b1
b3
1
33
b2