Kimex 049-3 W Serie Notice page 22

2. The method of ceiling installation
Make sure that the ceiling can support 50kg. As the picture showed, measure and draw lines for reference
to make sure the two mounts on the same level, install the mount on the ceiling and make sure the back
side of the mount meet the line. Draw two circles through the installation holes, drill two holes according
to the circles for the expension bolts with the percusiondrill. Install the mount on the ceiling through the
expension bolts and screw the nuts, then the mount fixed on the ceiling.
Install the other mount in the same way.
The method to install the screen showed below.
19