Kimex 049-3 W Serie Notice page 21

1. The method of wall installation
As the picture showed, measure and draw contour line on the wall to make sure the wall mount
level. Make the upper side of the wall mount meet the contour line. Hold it and draw a circle on the
wall through the install hole to make sure the point of the expension bolt. Take away the wall mount
and drill a hole to install the expension bolt on the center of the circle. Install the wall mount
through the expension bolt and screw the nut. Use the levelling instruments to make sure the
level of the wall mounts, and then draw a circle on the other side of the wall mount,drill and install the
other expension bolt. Install the wall mount through the two expension bolt, then screw the nuts and
fixed the mount on the wall.
Install the other wall mount on the same way. The
method to install the screen showed belo
18