Installation Instructions; Single Plp-Rem-350 Unit - Duratech DuraLink PLP-REM-350 Mode D'emploi

Installation Instructions

Single PLP-REM-350 unit

.
Connect a 230VAC power source to the 230VAC terminals of the
PLP-REM-350. Connect the pool lights to the 12VAC connection terminal
block in the PLP-REM-350.
.
The PLP-REM-350 has a 350VA transformer built in. The total power load
of pool lights (+ cable losses) may not exceed this.
Connect the
230VAC power
source to the
circuit breaker
6
PLP-REM-350
230VAC
Connect the pool
lights to the 12VAC
terminals