tuctuc HIP SEAT BABY CARRIER Mode D'emploi page 6

DIFFERENT MODES OF USAGE
1. AT THE FRONT
2. AT THE FRONT FACING FORWARDS (6+ MONTHS OLD)
3. AT THE REAR
4. MULTIPLE POSITIONS (SUPPORT BASE)
1. AT THE FRONT
-Attach the clip. Turn the carrier forwards. Adjust the belt and securely fasten it.
-Place the baby on the seat.
-Pass the belts over the baby's shoulders.
-Connect the back fastener.
-Adjust the belts to the baby's body.
If the product is used with a baby that does not have the neck strength to hold their neck upright,
attach the textile section. The shape of this part is designed to adapt to the infant's head. This textile
section has two snap-shut fasteners, which should be attached to the baby carrier's fasteners, and two
rubber strips to insert in the clasps on the carrier. This enables the baby's head to be held gently but
firmly in place against the adult's body. The chin should be raised away from the sternum to prevent
any risk of asphyxiation.
10
2. AT THE FRONT FACING FORWARDS (6+ MONTHS OLD)
-Attach the clip. Turn the carrier forwards. Adjust the belt and securely fasten it.
-Place the baby on the seat.
-Pass the belts over the baby's shoulders.
-Connect the back fastener.
-Adjust the belts to the baby's body.
11