Phase Linear PCR4500 Manuel De L'utilisateur page 4

INSTALLATION INSTRUCTIONS
Installation Using a Kit
If your vehicle requires the use of an installation
kit to mount this radio, follow the instructions
included with the installation kit to attach the
radio to the mounting plate supplied with the kit.
1. Wire and test the radio as described in
step 4 of "Using a Mounting Sleeve" on
page 3.
2. Install the radio mounting plate assembly
to the sub-dashboard according to the
installation kit instructions.
3. Attach the support strap to the radio and
dashboard as described in step 7 of
"Using a Mounting Sleeve" on page 3.
CAUTION: The support strap must be used
to prevent damage to the dashboard from
the weight of the radio or improper
operation due to vibration.
4. Replace the dashboard trim panel.
Removing the Radio
To remove the radio after installation, remove
the trim ring by lifting in the center and pulling it
off from either side. Insert the removal keys
straight back until they lock, then pull the radio
out. If removal keys are inserted at an angle,
they will not lock properly and will not release
the unit.
CAUTION: For proper operation
of the CD player, the chassis
must be mounted within 20° of
horizontal. Make sure the unit is
mounted within this limitation.
4
REMOVING THE RADIO
INSTALLATION
SEL
MO /ST
VOL
DSP UME
BAN
D
TAPE
REL
EAS E
TUN
E MUT
POW
ER LOC
PCR4500