Publicité
Les langues disponibles
Les langues disponibles
1. handlinG
2. installation
L
The complete cabinet must fit on a horizontal support, through the lateral holes planned for that.
It is recommended to use anti vibrating mounts and flexible couplings to connect the unit to the ducts.
Fastening of the accessories:
Damper and rectangular or circular couplings are fitted to the main casing with 4 HM8X20 screws.
The filter section is fitted to the main casing with 4 fasteners located on each side.
We recommend to use longitudinal feet fitting them at the juncture of the two casings (see the drawing below).
A 4 longitudinal feet kit can be order for the KSTV/A units, but 2 longitudinal feet are supplied with the filter sections, the mixing
chambers and electrical heaters.
never lift the complete assembly with
filter box, mixing chamber, etc...
For the maintenance operations and
L mini
for changing the filter, plan on the
transmission side, a distance equal to
the casing width L.
4
Pies longitudinales
Fastener
Publicité
