Scell-it ELEMENT SPLIT S Manuel D'utilisation page 6

3- HOW TO CHANGE MANDRELS
EN
FR
1
PL
CZ
• Remove the battery.
• Unscrew and remove the piece
• Roll up the stroke set
• Replace the mandrel.
• It is recommended to oil or grease the mandrel
before use in order to prevent premature wear.
SPLIT NUT INSTALLATION
Before installation first carry out the 'tool setting'.
• Insert nut in to the hole and verify that hole/nut/tool are well aligned.
• Press the button during the whole installation cycle (about 1 second).
IMPORTANT :
Accompany the automatic
unscrewing by pulling the
tool back slightly.
6 •
ELEMENT SPLIT - User Manual
2 3
.
2
then unscew the mandrel
5
5
?
1
4
.
1
1