Axis Communications 215 PTZ-E Guide D'installation page 9

AXIS 215 PTZ-E Installation Guide
Set the password
When accessing the AXIS 215 PTZ-E for the first
time, the 'Configure Root Password' dialog
appears.
1. Enter a password and then re-enter it, to con-
firm the spelling. Click OK.
2. Enter the user name root in the dialog as
requested.
Note:
The default administrator user name root cannot be deleted.
3. Enter the password as set above, and click OK. If the password is lost, the AXIS 215 PTZ-E must
be reset to the factory default settings. See page 12.
4. If required, click Yes to install AMC (AXIS Media Control), which allows viewing of the video
stream in Internet Explorer. You will need administrator rights on the computer to do this.
5. The Live View page of the AXIS 215 PTZ-E is displayed. The Setup link gives you access to menus
that allow you to customize the camera.
Accessing the AXIS 215 PTZ-E from the Internet
Once installed, your AXIS 215 PTZ-E is accessible on your local network (LAN). To access the camera
from the Internet, network routers must be configured to allow incoming traffic, which is usually
done on a specific port. Please refer to the documentation for your router for further instructions.
For more information on this and other topics, visit the Axis Support Web at www.axis.com/techsup
Page 9
Setup - Provides all
the tools for config-
uring the camera to
requirements.
Help - Displays
online help on all
aspects of using
the camera.