Avoiding Malfunctions; Technical Details - VISIOMED bewell connect MyScale Mode D'emploi

- Use a soft and dry cloth to clean the unit. If necessary, use a soft lightly moistened (tap water)
cloth.
- Do not use alcohol, benzene, thinner or other chemicals to clean the appliance.
- This product is not waterproof. Avoid any contact with liquid.
- If the unit has been exposed to a temperature below 0°C, be sure to leave it for 30 minutes at
room temperature before use. Without this waiting, the results could be distorted.
- If the unit is not used for a long period of time, be sure to remove the batteries (they could da-
mage the unit). Observe the polarity of the batteries. Do not mix old and new batteries. Do not
use rechargeable batteries. Do not dispose of your old batteries with your household waste.

5. AVOIDING MALFUNCTIONS

- Do not drop the appliance. Avoid shaking and shocks.
- Do not insert anything into the appliance, except batteries.
- Do not dismantle the unit.
- Do not put the appliance in water.
- Observe the temperature and humidity ranges stipulated in the specifications.

6. TECHNICAL DETAILS

Product name BewellConnect® MyScale Analyzer
Reference BW-SC2
Identified Software version V1
Item
Weight measurement range
BMI range
Body fat range
Water mass range
Muscle mass range
Bone mass range
Calorie range
Accuracy of graduations
Accuracy up to 50 kg
Accuracy up to 100 kg
Accuracy of 150 kg
Precision percentage
26 BewellConnect - BW-SC2 - User Manual - 112015
Unités Minimum Maximum
kg 5
- 2.5
% 5
% 10
% 25
kg 0.1
Kcal 385
kg 0.5
kg 1
kg 1.5
Body fat mass
Water mass
Muscle mass
Bone mass accuracy
Calories accuracy
Weight units
Profiles
Dimensions
Weight
Normal conditions of use
Storage conditions
Bluetooth technology
Power supply
Battery life
180
Automatic shut-off
90
Mode of operation
75
Internally powered equipement
80
Supplied accessories
75
10
3999
%
%
%
kg
Kcal
kg / lb
8 user profiles
Age: 10-80 years
Size: 100-200 cm
320 x 320 x 26mm
2kg
Temperature : 5 - 40°C
Humidity : 15 to 93% RH
Pressure altitude : 700hPa to 1060hPa
Temperature : -25 - 70°C
Humidity : 15 to 93% RH
Pressure altitude : 700hPa to 1060hPa
4.0 smart Low Energy
4 AAA batteries (supplied)
3-4 months (for 4 daily measurements)
Low battery indicator
±10 seconds
Continuous
A connected and smart impedance meter set of scales,
instructions, a quick installation guide, 4 AAA batteries.
BewellConnect - BW-SC2 - User Manual - 112015
5
5
5
0.2
115
27