Reflecta ProScan10 T Mode D'emploi page 46

Set Scan Preferences (Continued...)
3. Trailing Index after Base File Name Digits: Defines the length of the
file name and numbering sequence up to 6 digits Example image1 or
image000001.
4. Options - Use Film Index: Use the number assigned to the slide based on it's
position in the car tridge.
User Defined Start Number: Enter a specific star t number
5. Choose the file type , "TIF" or "JPG". ( TIF uncompressed or JPG Compressed-
Choose image quality for JPEG. (20-100) 100 offers the least amount of compres-
sion
Advanced Setting
"Auto Exposure" - Attempts to find the correct exposure to get the wid-
est range of whites and blacks while putting the middle grays at around
the middle of the data range.
"Auto Balance" - Using the image histogram to balance RGB channels. It
estimates images' color cast and adjust the images accordingly
"Auto Contrast" - The scanner software analyzes the data and automati-
cally adjusts the Setting for the White and Black Points.
"Digital Noise Reduction" – Applies a filter, Reducing the film grain.
"Multipass Xposure"-
When enabled Multi-Exposure performs a triple scan to obtain the best possible image,
This process captures the three individual scans, first a normal pass then two more
scans to highlight the shadow details to expose the darker areas more fully, The
software then intuitively calculates the final scan, which now contains the data from all
three scans.
"Multiple Sampling"-
Configure the settings to scan a single image (multiple times) 2x, 4x, 8x or 16x for
the highest quality output. Please note this greatly increases scan time. With Multi-
Sampling image noise is a thing of the past.
15