Getting Started - Reflecta ProScan10 T Mode D'emploi

GETTING STARTED

Check the package content before getting started.
For Quick Installation please refer to Quick Installation Guide. (Ref. Pg. 11)
Impor tant! Save the original box, receipt and packing material for future
shipping needs.
Package Contents
Slide Scanner.
•
Power Adapter
•
Warning! Using any other power adapter may severely damage the scanner
and will void the product warranty.
USB 2.0 Cable.
•
CyberView Driver.
•
Printed User ' s Manual.
•
NOTE:
Application software means the imaging software such as Presto "Photoshop
•
Elements ", this is subject to change without notice.
GENERAL GUIDANCE:
Only use the supplied USB-Cable. Connect the computer to the
•
scanner directly using the USB 2.0 cable.
Do not use a Hub or extension cable. Only use the USB por ts on the rear of
•
desktop computers.
If there are any other devices (multifunction device, printers, scanners, web-
•
cam) connected to the computer through USB disconnect them.
A minimum of 1,5 /2 GB RAM ( Windows/Mac) sis required.
•
4
[Fairway Electronics WRG 15F-120A