Aim TTi EX355P Mode D'emploi page 12

ERR? Returns the value in the error register in the form ERR <nr1><rmt>
Miscellaneous Commands
*RST Resets the instrument to the default power-up settings (1.00V, 1.00A, output off).
*IDN? Returns the instrument identification. The exact response is determined by the
instrument configuration and is of the form <NAME>,<model>, 0, <version><rmt>
where <NAME> is the manufacturer's name, <model> defines the type of
instrument and <version> is the revision level of the software installed.
0 = no errors.
1 = command not recognised.
2 = command value outside instrument limits.
11