Outbound 079-4100-2 Manuel D'utilisation page 11

B SIC OPER TION
The MODE CONTROL
The MODE touchpad allows for the elimination the detection of
unwanted metal objects.
By pressing MODE, the user toggles between four different discrimination
settings.
During MODE (or discrimination) selection, the SENSITIVITY INDICATOR
on the left of the display will flash continually. The detector will remain in
this discrimination selection mode for 10 seconds until a metal object has
been detected.
If an object is detected during mode selection, the detector will
exit mode selection. If this happens, you will need to press
MODE again and begin mode selection over again. To avoid this,
keep the detector stationary and reduce sensitivity before
pressing MODE.
The MODE touchpad has two functions:
Each first press of MODE will be followed by.
1
A distinctive tone or tones, indication the detector's stored
discriminating setting.
2
Flashing target and sensitivity indicators. The flashing target
indicators point to the targets eliminated.
Each subsequent press of MODE will toggle between discrimination settings.
The flashing arrow indicates the target category eliminated.
The detector will store the current discrimination setting until the power
is turned off.
HIGH TONE - no object eliminated.
LOW TONE - iron eliminated.
MEDIUM TONE - mid-range metals eliminated.
LOW AND MEDIUM TONE - irons and mid-range metals
both eliminated.
11