Philips LTC 2814/90 Manuel D'utilisation page 7

COLOR control (Fig. 1 item - 5)
Adjust the COLOR control to set the color (saturation) level.
When turned counterclockwise, the color seems pale (low
color).
When turned clockwise, the color seems saturated (high color).
TINT control - only applicable for NTSC (Fig. 1 item - 6)
Adjust the TINT control for the proper color phase or flesh
tone.
When turned counterclockwise, the skin tone become reddish.
When turned clockwise, the skin tone become greenish.
Note:
There is no TINT control in PAL display.
Composite Video-Y/C Switch (Fig. 1 item - 7)
Set the switch to Composite Video or Y/C for the connected
video input option.
- Composite Video, when monitoring a composite signal.
- Y/C, when monitoring a Y/C signal.
The INPUT INDICATOR (Y/C) will illuminate when the
desired video input is selected.
Video A/B Switch (Fig. 1 item - 8)
Set the switch to A (video A in) or B (video B in) when the
Composite Video option is selected.
- A, when monitoring the composite video A signal.
- B, when monitoring the composite video B signal.
The Input Indicator (A;B) will illuminate when the desired
video input is selected
Power on/off Switch (Fig. 1 item - 9)
Press the switch to turn the monitor ON. (The INPUT
INDICATOR will illuminate.)
Press the switch again to turn the monitor OFF.
1.3