Ramiaudio ODM808 Manuel Utilisateur page 36

WEB INTERFACE
 Outputs settings.
In this menu you set the GPO outputs. Attention only the 8 recorded numbers are allowed to
control these outputs using text.
 Output name 0 to disable output
 Output name 1 to enable output
Example
To enable output Reader1 send the following text:
Text Reader1 .0 ( output switches to 0).
Note : If you do not label the outputs use the default message : Out1.1 or Out1.0 and so on.
 Setting GPO/2 and or GPO/3 as timer.
The same procedure applies to outputs GPO/3.
Rami
Ventilation
.
.
It is possible to automatically start 8 events, at a given date on output GPO/2.
To start an event, stick the box, then input event beginning and end time, then the
required day(s).
 Enabled days are green, others are white.
Attention there is no space in the output
name.
Example : Reader1, Simcity, ventilation...
At the end of naming, do not forget to
validate.
Reader1
Reader1 .1 (output switches to1
36
Next
)
ODM808