Installation Guide - Ramiaudio ODM808 Manuel Utilisateur

INSTALLATION GUIDE

It is good practice to connect all equipments before to switch on.
A/ Wiring:
 Do not forget to install the SIM card before use. Switch off the equipment, remove the top
cover. Insert SIM card (3V type) into the black box, according to the following
procedure:
Shut the top cover.
Attention : From factory, the mobile phone is disabled. It must be enabled when accessing
 The first time, connect ODM808 to your computer using RJ45 port (LAN on the rear panel) Use
a crossed wire.
 You want to use the remote control dry loops input or output, connect the 25 pins sockets
GPO and GPI from ODM808 to your external equipments. Otherwise do not use these
sockets.
 Plug in the supplied aerial GSM on the rear panel.
Made in France (Fr)
100 to 250V 12W T 1A L
RJ45
Rami
Operate the eject mechanism
(yellow pin next to the card
holder) to open the card holder
by pressing it down with the
supplied tool
web pages
BATTERIES
FM
1 WIRE LAN
OPTIONAL
TUNER
AA + AA +
IN / OUT AUDIO
RJ45
USB port allows firmware update, and reload default IP
RS 232 GPO GPI
USB GPI
1 2 3 4 5 6 7 8
31
Insert the SIM card in the
SIM card holder and push
it back into the housing.
Antenna GSM
To external control remotes
GP0 OPTIONAL TUNER BATTERIES
1 2 3 4 5 6 7 8 YES NONE CHARGE
Site Monitoring

OK
ON
0 10
VOLUME
PHONES
ODM808