asalvo 12623 Instructions Pour L'utilisation page 18

B01
B04
EN
B07
B00- Remove changer , elevator and toymaker bow before anything else.
B01- Separating the Velcro, remove the mattress from the base of the travel cot.
B02- Look for the Red Ribbon of the base.
B03 / (O B04 ) / B05 - according to B03 holding the travel cot with one hand, lift the tape
with the other as in B04. An optimal way is to lift the tape while two fingers at least touch
the base. B03 or B04 anyway, the base must be raised to the height of the hand.
B06 / B07 - Look for the connector in the middle of the biggest side and tighten it to take
it down to her bottom and let it in V-shaped as shown in the figure.
B08- Use the same procedure to B06, B07, to fold all the short sides.
B09- is now successfully folded .
B10 / B11 / B12 / B13 / B14 - Wrap the cot in the mattress.
FOLDING THE TRAVEL COT
(the optimal form)
B02
B05
B08
B03
B06
B09