asalvo CRECE FIX Manuel D'instructions page 29

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 32
locking arms' button turn into
green safety color.
Guide the diagonal seatbelt
section into the belt
Guidance 2 until it lies completely
in the belt
Guidance 3 and is not twisted.
NOTE: Make sure that the
diagonal seatbelt section runs
over your child' s shoulder bone,
and not in front of his or her neck.
Place the diagonal and lap
sections of the vehicle' s seatbelt
through the belt guidance on the
child safety car seat. Lock the
seatbelt buckle into the vehicle
seat buckle with a CLICK noise.
CAUTION!
The diagonal seat belt section must run diagonally backward. You can adjust the
course of the belt with your vehicle' s adjustable belt deflector on both sides.
Shake the child safety car seat to make sure it is securely attached.
Place the lap belt section on the other side of the child seat in the belt guide 3.
CAUTION!
The lap belt section must lie as low as possible over your child ' s hips on both
sides.
Guide the diagonal seat belt section into the belt guidance 3 until it lies completely
in the belt holder and is not twisted.
3
INSTALLED IN CAR WITH BELT
Installed in Rearward FacingPosition
with Belt. Group0+(0-13KG)
Pull the vehicle seatbelt and pass
the lap belt section through the belt
guidance® and under the sleeping
cushion.
Pass the diagonal seat belt section
through the belt guidance®.
Fasten the seat belt and pull it tight,
ensuring that the seat belt is not
twisted.
INSTRUCTIONS
EN

Publicité

Table des Matières
loading

Produits Connexes pour asalvo CRECE FIX

Table des Matières