asalvo CRECE FIX Manuel D'instructions page 28

EN
INSTRUCTIONS
Press the ISOFIX button to pull
out the two locking arms from the
base bottom. Pull the locking arm
to and for until you hear an audible
CLICK which indicates they are fully
engaged.
And on both sides of the locking
arms ' button turn into green safety
color.
Pull out the top tether, and press the
release button, pull the top tether
long enough to hang the latch on the
back of the car seat.
Fixed the latch on the fixed point, and
the 11 position of the fixed point are
shown in the picture(one of the three
positions).Make sure the hook is
tightened up.
Group II, III (15-36KG)
NOTE: When you use this safety car
seat in group II, III, please remove the
5-point harness, sleeping pads and
the triangle pads refer to Chapter 4.2.
Place the child seat forward facing
on the vehicle seat (in the direction
of travel).
Put the ISOFIX insert guide into the
two ISOFIX attachment points of
your vehicle.
NOTE: The ISOFIX attachment points
are located between the surface and
the backrest of the vehicle seat.
Press the ISOFIX button to pull
out the two locking arms from the
base bottom. Pull the locking arm
to and for until you hear an audible
CLICK which indicates they are fully
engaged. And on both sides of the