Setting The Rear Output And Subwoofer Controller; Switching The Telephone Muting/Attenuation - Pioneer AVH-P6400CD Mode D'emploi

Section
Initial Settings
12
Setting the rear output and sub-
woofer controller
This product's rear output (rear speaker leads
output and RCA rear output) can be used for
full-range speaker (
subwoofer (
REAR SP:S.W
switch rear output setting to the
you can connect a rear speaker lead directly to a
subwoofer without using an auxiliary amp.
Initially, the unit is set for rear full-range speaker
connection (
REAR SP:FULL
When rear output are connected to full range
speakers (when
can connect the RCA subwoofer output to a
subwoofer. In this case, you can select whether
to use the subwoofer controller's (low pass
filter, phase) built-in
the auxiliary
S.W CTRL:EXTERNAL
Notes
• Even if you change this setting, there is no
output unless you switch the non fading out-
put (refer to page 57) or subwoofer output
(refer to page 57) in the audio menu on.
• If you change the subwoofer controller, sub-
woofer output and non fading output in the
audio menu return to the factory settings.
• Both rear speaker leads output and RCA rear
output are switched simultaneously in this
setting mode.
1 Press 5 or ∞ to select
INIT MENU, and press
REAR SP adjustment indications are displayed.
2 Change the rear output setting with 5/∞.
Pressing 5/∞ will switch between
(full-range speaker) and
:FULL
(subwoofer) and that status will be displayed.
60
En
) or
REAR SP:FULL
) connection. If you
REAR SP:S.W
).
is selected), you
REAR SP:FULL
S.W CTRL:INTERNAL
.
from the
REAR SP
.
A.MENU
REAR SP
REAR.SP :S.W
Notes
• When no subwoofer is connected to the rear
output, select
• When a subwoofer is connected to the rear
output, set for subwoofer
• When the rear output setting is
you cannot change the subwoofer controller.
,
3 Change the subwoofer controller with
2/3.
Pressing 2/3 will switch between
:INTERNAL
status will be displayed.
Switching the Telephone
or
Muting/Attenuation
When a call is made or received using a cellular
telephone connected to this product, you can
select between muting and attenuation when
using the Handsfree Telephone Unit.
1 Press 5 or ∞ to select
the INIT MENU, and press
TEL MUTE/ATT adjustment indications are dis-
played.
2 Switch the telephone muting/attenuation
with 2/3.
Pressing 2/3 will switch between
MUTE/ATT:MUTE
(attenuation) and
(normal) and that status will be displayed.
.
REAR SP:FULL
REAR SP:S.W
REAR SP:S.W
and
S.W CTRL:EXTERNAL
TEL MUTE/ATT
A.MENU
(muting),
TEL MUTE/ATT:ATT
TEL MUTE/ATT:NORMAL
.
,
S.W CTRL
and that
from
.
TEL