Technical Specifications - PRONIVO PNTL45 Mode D'emploi

Technical specifi cations
Laser type
Laser classifi cation
Number of laser lines
Visibility
Beam pulsing for op-
eration with hand-
held receiver
Power supply
Opertating time of
battery
Accuracy
Levelling accuracy
Angular accuracy
Protection class
Operating temperature -10°C bis +45°C
Protect the device against moisture and direct sunlight.
• Do not expose to extreme temperatures or temperature changes.
E.g. do not leave it in a car for a longer period of time. Before putting it
in operation, allow the device to acclimatise when it was exposed to high
temperature changes. Extreme temperatures or temperature changes
can impair the accuracy of the device.
• Protect the device against hard shocks or drops.
• Position the tool and level using the levelling feet [4].
• Switch on using the control button [1]. The laser lines at a 90° angle in
the forward direction are activated.
Important
The projection accuracy of the 45° and 90° angles is dependent on the
exact alignment of the device relative to the projection plane!
12
635 nm
2 M
5
Up to 10 m depending on the lighting conditions
Range of > 40 m
3x 1.5 AA batteries
Up to 10 hours depending on how many laser
lines are active
± 1.0 mm/1 m
± 2.5 mm/10m
IP55 (except battery housing)
Switching on (fi g. I)
Start-up