Bimar JFD-121 Notice D'instructions page 15

Clean the battery contacts and also those of the equipment prior to battery
installation.
• This device is NOT suitable to use it in an explosive environment (in the presence of
flammable substances such as gas, vapor, mist or dust, in atmospheric conditions when,
after ignition, the combustion is spread in the air).
•
In case of leak from batteries, avoid any contact with it; in case of contact, wash the
affected part with water and seek medical attention.
• This appliance must only be used with the adapter supplied.
ASSEMBLY
Caution: the fan can be used only if completely and correctly assembled, i.e. complete with
the "motor body", base with support pin, and when desired, the lower column.
• Caution: Before assembling the fan, make sure that it is disconnected from the power
outlet. If in doubt, have the assembly checked or carried out by professionally qualified
personnel. During assembly, use the figures as reference.
1. Adapter plug housing
2. Base with support pin
3. Display
4. Motor body
5. Crankshaft
6. Rear grille
7. Lower column
8. Rear grille fixing ring nut
9. Propeller
10. Propeller fixing ring nut
11. Front grille/protective screen
12. Adapter
13. Remote control