Operation - auna Big Party 1500 Mode D'emploi

Normal Function
1 Be sure to switch off the power and to connect the outputs to corresponding input jacks.
2 Turn on the power and wait 3-4 seconds until the speaker functions are connected.
3 Select an audio source by pressing the INPUT key on the front panel or on the remote control to
display AUX, LINE IN, USB A, BT, TUNER, RECU.
4 Adjust the VOLUME knob on the front panel or the VOL +/- key ont the remote control to adjust the
setting of the main volume.
5 Press the MENU key on the front panel or on the remote control to display TREBLE, BASS, XDRIVE,
LIGHT, MODE, MIC VOLUME/ECHO/BASS/TREBLE then adjust the VOLUME knob or ajust +/- to
change MUSIC, TREBLE, BASS, LIGHT mode and MIC effect.
6 Press the DJ EFFECT key on the panel or the DJ key on the remote control to display SCRATCH,
REVERB, BEAT BOX, YEAH mode. Then adjust teh DJ knob to design and change the music effect
which you like.
7 Press the MUTE key to mute, press it again to reset.
Karaoke Function
1 The machine can auto detect whether MIC1 oder MIC2 ist inserted. Please turn off the microphone
volume and adjust the volume gradually after inserting the microphone.
2 Press MENU on the front panel to display MVOL, then adjust the VOLUME knob to change the
microphone volume.
3 Press MENU on the front panel to display ECHO, then adjust the VOLUME knob to change the mi-
crophone echo.
Notice: Do not touch the top of the microphone when singing in order to avoid howling effect. Adjust
the microphone volume gradually to avoid howling effect.
BT-Pairing and Connection
1 Turn off any BT devices previously paired (linked) with this unit.
2 Turn on the BT features on your phone or music player.
3 Turn on and set this unit to BT mode. The flashing blue light „BT" on LED display indicates it is in
pairing mode.
4 Set your phone or music player to search for BT devices.
5 Select "BigParty" from seach results on your phone or music player.
6 Select OK of YES to pair this unit with your pohne or music player.
7 If protected, enter 0000 for passkey. Steady blue light indicates successful connection.
8 Press the DISCONNECT key on the remote control to disconnect BT.

Operation

15
www.auna.de