Samsung RF28 Serie Manuel D'utilisation page 30

Installation
STEP 5 Adjust the door height and the door gap
To adjust the height of a door
CAUTION
• Insert only one snap ring. If you insert two or more snap rings, the rings may slip out or
make a rubbing noise.
• Keep the snap rings out of children's reach and keep them for future use.
• Do not raise the door too much. The door can contact and damage the top cover.
30 English
Untitled-1 30
Snap rings
The height of a door can be adjusted using the provided
snap rings, which come in 4 different sizes (1 mm,
1.5 mm, 2 mm, and 2.5 mm).
1. Check the height difference between the
doors, and then lift up and hold the door
with the lower height.
2. Insert a suitable-sized snap ring (A)
between the door grommet (B) and the
hinge as shown.
2020-06-09 PM 3:20:01