Safety Notice; Safety Warnings - Impecca IWA-05NM Mode D'emploi

INTRODUCTION:
Thank you for purchasing this quality Impecca window-mounted air conditioner unit. To
ensure the longest life and highest energy efficiency of your unit, please have it installed
by a qualified service technician and carefully follow these operating instructions. Keep
these instructions in a safe place and consult them as needed.
Please note that constant enhancement and improvements to our air conditioning units
may mean that your model will slightly differ in appearance from the model pictured in
this manual, but the actual operation and installation of the unit remains unchanged.

SAFETY NOTICE:

This appliance should not be used by children or mentally/physically disabled persons
without strict, direct supervision by a responsible adult. Never play with or around the
appliance.
IMPORTANT INFORMATION
Read the following notices and information carefully to ensure proper operation of your
air conditioner unit.
IMPORTANT INSTALLATION GUIDELINES
Ensure that a qualified and authorized technician performs the air conditioning unit
installation.
1. Do not install the units in areas with potential gas leaks and around inflammable
substances. Areas without proper ventilation are hazardous and can cause fires.
2. Ensure that your unit is connected to a circuit breaker with the amperage that
corresponds to the electrical current required to operate your air conditioning
unit. Improper electrical systems can lead to electrical shock, electrocution, or fire
hazards.
3. Ensure the unit is properly grounded. Improper grounding can lead to electrical
shock, electrocution, or fire hazards.

SAFETY WARNINGS

1. Do not stop unit operation by pulling the power cable out of the plug. Electrical
shock, unit damage, and fire hazards may result in addition to other accidents.
2. Connect your unit directly to a properly grounded wall-mount electrical socket.
Never connect the unit with an extension cable or outlet splitter of any kind, which
may result in electrical shock, overheating, fire hazards, or other accidents.
3. Do not press, stretch, kink, damage, heat, deform, or modify the power cable in
any way. Doing so may result in electrical shock, electrocution, overheating, fire
hazard, or other accidents. Should your units power cable be damaged in any way,
contact technical support immediately for a replacement solution.
–1–