Cooper Lighting Solutions LUMARK WPLLED Série Instructions D'installation

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

IB514014EN
Installation Instructions - WPLLED
Instructions d'installation - WPLLED
Instrucciones de instalación - WPMLLED
WARNING
Make certain power is OFF before starting installation
or attempting any maintenance. Risk of fire/electric
shock. If not qualified, consult an electrician.
WARNING
Risk of Electric Shock—Disconnect power at fuse or
circuit breaker before installing or servicing.
WARNING
Risk of Burn—Disconnect power and allow fixture to
cool before servicing.
WARNING
Risk of Personal Injury—Fixture may become damaged
and/or unstable if not installed properly.
IMPORTANT: Read before installing fixture. Retain for future reference.
SAFETY: This fixture must be wired in accordance with the National Electrical Code and applicable local codes and
ordinances. Proper grounding is required to insure personal safety. Carefully observe grounding procedure under
installation section.
WARNING
DO NOT mount luminaire within 6" of a combustible
surface. DO NOT handle luminaire by the glass.
N
ote:
These instructions do not claim to cover all
details or variations in the equipment, procedure,
or process described, nor to provide directions
for meeting every possible contingency during
installation, operation or maintenance. When
additional information is desired to satisfy a
problem not covered sufficiently for user's purpose,
please contact your nearest representative.
N
ote:
Specifications and dimensions subject to change
without notice.
Brand Logo
reversed out of
black
INS #
INS #

Publicité

Table des Matières
loading

Sommaire des Matières pour Cooper Lighting Solutions LUMARK WPLLED Série

  • Page 1 Brand Logo reversed out of black IB514014EN INS # INS # Installation Instructions - WPLLED Instructions d’installation - WPLLED Instrucciones de instalación - WPMLLED WARNING WARNING Make certain power is OFF before starting installation DO NOT mount luminaire within 6” of a combustible or attempting any maintenance.
  • Page 2: Applications

    Figure 3. tightened firmly. Apply weatherproof silicone sealant around all edges between the fixture housing and mounting surface. ote: Mounting height to be a minimum of 6 feet. COOPER LIGHTING SOLUTIONS IB514014EN Installation instructions...
  • Page 3: Important

    Ouvrez le luminaire en desserrant les deux vis Figure 1. WPLLED100 inviolables avec l'embout Torx T-20 inclus sur le côté opposé aux charnières et retirez la porte vitrée. Retirez les bouchons (Figure 1). - Figure 2.) COOPER LIGHTING SOLUTIONS IB514014EN Instructions d’installation...
  • Page 4: Montage

    Appliquez du silicone étanche sur tous les bords entre le boîtier du luminaire et la surface de montage. emarque: La hauteur de montage doit être de 1,8 m (6 pi) minimum. COOPER LIGHTING SOLUTIONS IB514014EN Instructions d’installation...
  • Page 5: Herramientas Necesarias

    WPLLED100 a los golpes con la broca Torx T-20 (incluida) en la parte lateral y retire la unidad de la puerta de vidrio. Retire los tapones de drenaje (Figura 1. - Figura 2.) COOPER LIGHTING SOLUTIONS IB514014EN Instrucciones de instalación...
  • Page 6 La altura de montaje debe ser de 1,82 m (6 pies) como mínimo. COOPER LIGHTING SOLUTIONS IB514014EN Instrucciones de instalación...
  • Page 8: Garanties Et Limitation De Responsabilité

    Garanties et limitation de responsabilité Veuillez consulter le site www.cooperlighting.com pour obtenir les conditions générales. Garantías y Limitación de Responsabilidad Visite www.cooperlighting.com para conocer nuestros términos y condiciones. Cooper Lighting Solutions is a Cooper Lighting Solutions registered trademark. All trademarks are property 1121 Highway 74 South of their respective owners.

Ce manuel est également adapté pour:

Lumark wplled100Lumark wplled125

Table des Matières