Maintenance & Care; Charging The Battery; Emptying The Dirt Container - Bissell POWERGLIDE Cordless 1538 Série Mode D'emploi

Maintenance & Care

Charging the Battery

1. Remove battery housing cover by pressing
release button and pulling away.
2. Remove battery by pulling out of machine.
3. Place battery in charging base, ensuring
it is plugged into the mains.
4. Charger light will turn red during charging
and turn green when battery is full.
5. A full charge will take 2 hours.

Emptying the Dirt Container

1. Press the dirt tank release button and pull dirt
tank away from body by the handle.
2. Holding the Dirt Container over a trash bin,
press the Release Button on back. Snap the
bottom back into place.
Cleaning the Dirt Container
1. Release dirt tank as above, then twist
the top right to separate.
2. Remove filter by pulling up on the fabric
tab, then pull out the cyclone system.
3. Empty dirt container in trash bin. It may be
rinsed clean. Make sure it is completely dry
before replacing.
4. To reassemble, line cyclone system up with
dirt container using the semi circular and
square tabs then slide in. Place filter on top
with fabric tab on the upper face, place lid
last and twist left.
1.
3.
WARNING
To reduce the risk of electric shock, turn power switch off
and disconnect polarized plug from electrical outlet before
performing maintenance or troubleshooting checks.
1.
WARNING
Do not operate cleaner with damp or wet filters or
without filters in place.
1. 2.
2.
4.
LED
2.
3. 4.
www.BISSELL.com
7