English (Gb) - Honeywell HPA100WE Mode D'emploi

ENGLISH (GB)

IMPORTANT SAFETY INSTRUCTIONS
Read through all the instructions before
starting to use the appliance. Keep this manual
in a safe place for future reference.
These instructions are also available on our
website. Please visit www.hot-europe.com.
WARNING:
• Prior to cleaning or other user maintenance,
the appliance must be disconnected from
the mains supply.
• This appliance can be used by children
aged from 8 years and above and persons
with reduced physical, sensory or mental
capabilities or lack of experience and
knowledge if they have been given
supervision or instruction concerning use of
the appliance in a safe way and understand
the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be
made by children without supervision.
• Do not expose the air purifier to rain, or use
near water, in a bathroom, laundry area or
other damp location.
• The air purifier must be used in an upright
position.
• Do not allow foreign objects to enter air inlet
or outlet grilles as this may cause electric
shock or damage to the air purifier.
• Do not tug at the power cord to disconnect
the plug. Do not touch the power cord with
wet hands. Do not remove the power plug
from the power socket while the product is
in use.
• Do not use accessories, spare parts
or components supplied by other
manufacturers, and that are not designed
for use with this appliance.
• Always switch the appliance off and
disconnect the power plug from the power
socket when the appliance is not in use or
during transport.
2
• If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order
to avoid a hazard.
• Do not use this appliance if it is damaged or
shows any signs of possible damage or if it
is not functioning properly. Disconnect the
power plug from the power socket.
COMPONENTS
(See page 1)
1. Front grille
2. Pre-filter
3. HEPA filter
4. Control panel
a. Timer
b. Check filter
c. Check Pre-filter
d. Power
e. Cleaning level
f. Turbo
g. Dimmer
5. Power cord
USER INTERFACE
Symbol Function
ON / standby
Timer - 2, 4 or 8 hrs
3 Allergen
2 General
1 Germ
Fast filtration
Sleep – select to dim control panel lights
during night operation
Check pre-filter – if illuminated A /replace
pre-filter
Check filter – if illuminated R /replace true
HEPA filter
FIRST TIME USE
(See page 1)
The True HEPA Filter and Odor Reducing Pre-Filter are supplied
within the air purifier. New air purifiers have their filters wrapped
to ensure purity, and are labeled to help identify the proper
replacement filter.
Before using your new air purifier you must remove the wrappers
covering the filter and Pre-Filter.
Make sure the air purifier is OFF and unplugged. Press the two hand
symbols ( ) on the front grille to release it from the unit and pull
the grille toward you to remove it (see Fig. 1). Remove the Pre-filter
(see Fig. 2). Grasp the sides of the filter frame near its top end and
pull outward (see Fig.3).
Remove protective wrapping from the filters.
Place the HEPA filter into the air purifier housing (see Fig. 4). Ensure
that the removal "pull" tabs are facing outward (this will facilitate
filter removal later). Place the Pre-Filter on top of the HEPA filter.
Tuck the edges of the Pre-Filter into the tabs that are located
around the edges of where the HEPA filter is inserted (see Fig. 5).
This will hold the Pre-Filter securely in place.
Replace the front grille by placing the tabs on the bottom of the
grille into the slot(s) on the unit. Gently push the top of the grille
into place by pressing on the hand symbols ( ) to secure in place
(see Fig.6).
OPERATING INSTRUCTIONS
(See page 1)
Once the filters have been unwrapped and replaced in the unit,
plug the power cord into a working electrical outlet.
Select the desired cleaning level by simply TAPPING the power
symbol ( ) to toggle through the setting options. A blue LED
light will illuminate the selected setting: Germ, General Clean or
Allergen.
POWER ( ) for on/off & cleaning level selection.
ALLERGEN (3) optimizes allergen capturing performance
during allergen season.
GENERAL CLEAN (2) for general, everyday air cleaning.
GERM (1) optimizes germ capturing performance. Use during
cold & flu season.
TURBO ( ) for power cleaning or fast odor reduction.
The Turbo setting operates the unit at the highest speed. This
setting will maximize the unit's ability to help reduce odors and will
help clean the air quickly. To select the Turbo setting, the unit must
already be running at one of the 3 cleaning settings, TAP the Turbo
icon ( ). The Turbo LED will illuminate.
TAPPING the Turbo icon ( ) again will return the air purifier to the
previous cleaning setting. To shut OFF, tap the Power symbol ( )
until the air purifier shuts off.
TIMER
(See page 1)
The Timer Option ( ) allows you to select how long the air purifier
will run before it automatically shuts off.
DIMMER
(See page 1)
The Dimmer Option ( ) allows you to adjust the brightness
depending on the room where the unit is placed. The unit always
turns on with the brightness on HIGH.
ELECTRONIC FILTER CHANGE REMINDER
(See page 1)
When the True HEPA filter and/or the Pre-Filter need to be replaced,
the Check Filter ( ) or Check Pre-Filter ( ) light will illuminate.
You should periodically check these filters. Depending on operating
conditions, the True-HEPA filter should be replaced every 12 months
and the Odor Reducing Pre-Filter every 3 months.
ENGLISH (GB)
TO RESET EITHER ELECTRONIC FILTER CHECK
(See page 1)
After you have replaced the appropriate filter(s) the Check Filter
( ) or Check Pre-Filter ( ) light will remain on until it is reset.
With the unit powered on, press the lighted button and hold for
approximately
2 seconds until the light turns off. The electronic filter check is
now reset. Depending on individual usage (environment and hours
used), you may need to replace filters more or less frequently.
NOTE: If you change the Pre-Filter or Filter before the Electronic
Filter Check lights are illuminated, it is possible to re-set the light
indicators. With the unit plugged in, but NOT powered on, press
and hold each button individually for at least 5 seconds. This will
illuminate the indicator light. After the light turns on, individually
press and hold the Check Filter ( ) or Check Pre-Filter ( ) button
until each light goes off. At this point, the filter indicator will be
re-set to it's original "clean" status.
NOTE: None of the filters are washable. Do not immerse them in water.
FILTER REMOVAL
(See page 1)
Turn-off and unplug the air purifier and follow the instructions of
"First time use".
REPLACEMENT FILTERS
• Pre-filter : HRF-AP1E
• HEPA filter : HRF-R2E
CLEANING AND STORAGE
We recommend that you clean the air purifier at least every
3 months and before extended storage. Use only a dry cloth to wipe
the external surfaces of the air purifier. DO NOT USE WATER, WAX
POLISH, OR ANY CHEMICAL SOLUTION.
If your Air Purifier will not be used for more than 30 days, we
recommend:
• Remove the True-HEPA Filter from the unit .
• Discard the pre-filter.
• Wrap the HEPA filter in an air-tight plastic bag or plastic wrap.
Be sure that the filter is totally sealed.
DISPOSAL
This appliance complies with EU legislation 2012/19/EU on
end of life recycling. Products showing the 'Crossed
Through' wheeled bin symbol on either the rating label, gift
box or instructions must be recycled separately from
household waste at the end of their useful life.
Please DO NOT dispose of appliance in normal household
waste. Your local appliance retailer may operate a 'take-back'
scheme when you are ready to purchase a replacement product,
alternatively contact your local government authority for further
help and advice on where to take your appliance for recycling.
3