Mobicool D10 Notice D'emploi page 10

_D10_D10-LX.book Seite 10 Montag, 22. November 2010 5:27 17
Operation
6.2 Cooling wine
Switching on the device
➤ Switch the function switch (2 2, page 3) to "ON".
➤ Press the "POWER" button (2 5, page 3) to switch on the device.
✓ The display switches on and shows the current cooling temperature in C°.
➤ To cool a bottle, place it standing vertically into the device.
Setting the temperature
You can set the temperature within a range from +5 °C to +20 °C.
Note
The cooling capacity is influenced by the ambient temperature.
➤ Press the "TEMP –" button (2 3, page 3) to decrease the desired
cooling temperature by 1 °C , or press the "TEMP +" button (2 4, page 3)
to increase the desired cooling temperature by 1 °C.
✓ The cooling temperature in °C that you just set flashes in the display for
few seconds. Then the current cooling temperature is displayed again.
Switching off the device
➤ To end the cooling process, press the "POWER" button (2 5, page 3).
✓ The display switches off, and the bottle ceases to be cooled.
6.3 Inserting/replacing the batteries (D10)
The D10 wine cooler is powered by standard AA batteries (1.5 Volts) inserted
into the battery box. This battery box is then inserted into the device.
You can also use following rechargeable batteries: (AA) NiMH, 1.2 Volt,
2100 mAh.
Caution! Danger of injury!
Batteries contain aggressive and caustic acids. Avoid battery fluid
coming into contact with your body. If your skin does come into con-
tact with battery fluid, wash the part of your body in question thor-
oughly with water.
10
D10 / D10-LX