Maintenance; Storage - Walter E-WELD PLASMA 53-L 126 Instructions D'utilisation Et De Maintenance

E-WELD PLASMA SPAYER 53-L 126
The spray pattern can be influenced by the following factors:
• Quantity of liquid via stop screw / nozzle needle : (recommended 1/4 turn)
• Adjustment of the inlet pressure (recommended 50 psi)
• Spray air via knurled screw on the sprayer head (recommended 1-1/2 turn)
o For fine jet - add a lot of air
o For coarse jet - add a little air
• Distance of the spray nozzle to the object
• Angular position of the sprayer to the object
After Use: Vent the pressure vessel using the exhaust valve. After each use, dis-
connect the device from the compressed air network. Clean the device as direc-
ted.
Warning:
Never operate the trigger when container is under pressure,
but not connected to the compressed air source. This allows
the liquid to flow into the air channels and render the tool
unusable!

7. Maintenance

Clean the compressed air device after each use. We recommend to use water
and let it dry. Do not use aggressive cleaners! Compliance with the specified
maintenance instructions ensures a long service life and trouble-free operation
for this quality product.
Warning:
Disconnect the device from the compressed air source before
you start servicing and maintenance.

8. Storage

The compressed air tool must be stored under the following conditions:
• Carefully clean the sprayer after each use.
• Store dry and dust-free.
• Do not expose to liquids and / or aggressive chemicals.
• Store away from children.
PAGE | 5
V1.00/ DEC18